The 600lb. capacity hopper has a thick wall of HDPE UV Protected plastic that will not rot, rust or leak! Our Hoppers are Roto Molded. The same process used to make white water kayaks.
This maintenance FREE hopper system , with 84" gravity feeder legs is A TOP SELLER in our line. With our Patented Protein/Gravity Head you get the most moisture resistant free choice feeding system available on the market today! The Custom Designed gravity head features a 10 degree of angle, and a 1" overhang on the 4" feed ports. Each feed port is 8" long and has a drain hole to disperse any water that enters the tip of the feed port.
Our patented design features an internal cone that dispenses the feed evenly to the four ports. The 4-Way inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your favorite type of critter food.
Our double walled hatch LID tops this unit off in style, and function. Built oversized, this lid allows the hopper system to breath, thus eliminating condensation while achieving ambient temperature faster than Steel or Fiberglass feeders.
Perfect for feed pen set-ups that are not accessible by livestock or wild hogs.
NOTICE: Using salt based feed materials/blends through a Boss Buck control system will void the parts warranty! Salt based mineral supplements, such as Big Tine 30-06 mineral blend, will corrode and rust your feeder control box more rapidly than using corn, protein or other non-salt based feeds.
*Important Notice*: We highly recommend you use foot pads on all Boss Buck feeders to protect them from sinking into the ground. Boss Buck offers Standard and Heavy Duty feeder feet as an accessory for your convenience. Please use our foot pads or a suitable substitute to anchor down your feeder!
• 600# Corn (approximately)
• 500# Large Protein Pellets (approximately)
• "Protein" Feeder Legs 84" 16 GA
• Hatch lid is 3" deep
• 81" from Ground to Lid
• 42" Feed Height (Ground to Spout)
• Inside spread of legs 40"
• All galvanized hardware
• Feed tubes have 10° Angle
• Feed tubes have 1" overlap on top of each Port
• Feed ports are 8" long and 4" I.D.
• Each Port has a drain hole
• Feeder dimensions: 48x48x60
• Converts from protein to spin feeder in minutes!!
(IN STORE PICK UP ONLY!)